Pictures of the proper tool for removing wires from plastic connectors can
be found on the Yahoo SubaruVanagon website in the file "Tool to remove
wires from connectors.jpg" in the folder
http://autos.groups.yahoo.com/group/subaruvanagon/files/Wiring%20/ .  This
is available at the larger professional, not consumer, autoparts stores.
Work carefully as Zolly describes and it works great.

Ed

On Sun, 1 Aug 2010 17:47:03 -0700, Zolly <zolo@FOXINTERNET.NET> wrote:

>Both male or female electrical connectors have a little tab that act to
keep them in their housing.  Need to bend them to straight to be able to
pull them out.  It is always in the middle, right at the plastic bottom.
Once you have done it a few times, it's a piece of cake.  You can't pull on
the wire when you are trying to bend the tab, only after.  Sometimes it
takes several tries.  As always, you need patience.
>
>I use a very thin screw driver like tool I made out of one by grinding it
narrower  and more flat.  It needs to be strong enough.  I broke it once
already in action.  Yet, as you know, we are dealing with thin and soft
copper.
>
>When you need to reinstall, you would have to bend the tab back so it would
hook the plastic to prevent it from coming out again.
>
>Zoltan